Can-Am Outlander 1000 (2026) Stage 1: locked Bosch MG1 unlocked and tuned
Can-Am Outlander 1000 (2026) Stage 1: locked Bosch MG1 unlocked and tuned
A brand-new 2026 Can-Am Outlander 1000 came in with 82 hp from the factory. Under the seat sits a Bosch MG1CA920, an ECU that is locked and cannot be read over OBD. We opened it on the bench, saved the original and did Stage 1.
The problem: a locked Bosch MG1
New Can-Am ATVs and side-by-sides use a Bosch MG1 ECU. On this version, MG1CA920, the factory has locked reading. Over the OBD port you can't even read the original, let alone write a new map.
That is where most tuners stop. We removed the ECU and opened it on the bench.
How we opened it
- Step 1: ECU on the bench. We connected the ECU to Korhex + Flex from Magic Motorsport, a tool for locked Bosch MG1 units. Reading is done with the boot glitchmethod, directly on the board.
- Step 2: reading the ECU. We read the internal flash and EEPROM, the complete content of the unit.
- Step 3: unlocked and read. The original file is saved. The ATV can be returned to factory settings at any time.
What we changed (Stage 1)
- Stage 1 software. Sharper throttle response and more power across the whole rev range. The hardware stayed stock.
- Vmax limiter. Speed limit adjusted to the owner's request.
- RPM limiter. Rev limit adjusted, within safe limits for the engine.
Changing the speed limiter is for off-road use. If the ATV is road-registered, the owner is responsible for complying with the regulations.
Why the original matters
Before any change we save the complete original: flash and EEPROM. With locked ECUs this matters even more, because without it there is no way back to factory settings. We keep the original in our archive and you can get it back whenever you need it.
For tuners: MG1 on Can-Am
Have a Can-Am with a locked MG1 but no tool, or don't want the risk? Send us the vehicle or the ECU. If you can read the unit yourself, order the file through our file service, available 24/7.
If you want to do the boot glitch yourself on Korhex + Flex, join the advanced Flex + Korhex training with Magic Motorsport in Danilovgrad, on 28 November 2026. We also teach chiptuning basics at ASF Academy.
Frequently asked questions
- Can a Can-Am Outlander 1000 be tuned over OBD? The 2026 model with the Bosch MG1CA920 can't, because the ECU is locked. It is read on the bench with the boot glitch method.
- Can the factory map be restored? Yes. The original file is saved before any change.
- Do you work on other Can-Am models (Maverick, Defender, Renegade)? Send us the model and year, and we will tell you what is possible for your vehicle.
Want Stage 1 on your ATV?
Send us the model and year, and we will tell you what is possible. Tuners can order files through our file service, available 24/7. We are an authorized WinOLS dealer (ID 15128), with a network of 950 dealers worldwide.
Send an enquiry 24h file service Call +382 69 609 609📍 ASF.Tuning / ASF Motorsport, Danilovgrad, Montenegro