Mini Countryman 2.0D Stage 2 on the dyno: 205 HP and 430 Nm
A Mini Countryman (R60) with the 2.0 diesel engine came to us for Stage 2. We measured it on our dyno in Danilovgrad, wrote a map for this car and tested it on the dyno. The result: 205 HP and 430 Nm, 69 HP and 116 Nm more than before.
205 HPSTAGE 2
+69 HPMORE THAN BEFORE
430 NmTORQUE
Before and after
BEFORE
STAGE 2
DIFFERENCE
Power
136 HP
205 HP
+69 HP
Torque
314 Nm
430 Nm
+116 Nm
Both runs were made on the same dyno in our workshop in Danilovgrad. That is about 51% more power and 37% more torque, with the engine running within safe limits.
What we did
Baseline measurement. The car was measured on the dyno first, so we know exactly where we start.
Stage 2 map written for this car. Not a ready-made file. Boost, injection quantity and timing and smoke limits were tuned together, with the parameters checked on every run.
Dyno verification. The new map was checked over several runs, so power and torque build smoothly, with no dips in the curve.
Why on the dyno
All our files are developed and tested on our dynos: 4x4 dyno, 2WD hub dyno and bike dyno.
On the dyno you see the whole power and torque curve, not just the peak number.
If something isn't right, you see it on the dyno, not on the road.
You get before and after measurements, so you know exactly what you got.
Want a result like this?
Send us your car and the stage you want, and we will tell you what is possible. Tuners can order files through our file service, available 24h. We are an authorised WinOLS dealer (ID 15128), with a network of 950 dealers worldwide.
📍 ASF.Tuning / ASF Motorsport, Danilovgrad, Montenegro
Buying a used car?
Check the vehicle history before you buy
Leave no car unchecked.
A carVertical report by chassis number (VIN) shows the mileage history, reported damage and theft, and earlier listings with photos, as far as data exists for that vehicle.